CR-10 50 x 15 Double Blower Fan Fang Mount

thingiverse

Here is a remix version of Imagine That Titian/Atlas, Creality CR-10, Afinibot A31 Print Cooling by RebelRousingProps. Here are the improvements I've made. 1. The original design fails to accommodate my 50 x15 mm part fan due to its actual thickness of 15.6mm. To resolve this issue, I enlarged the mounting hole to ensure a proper fit. 2. The original design also causes the bowden clamp at the heatbreak side to bend slightly forward due to lack of space. This could compromise the nozzle system's perpendicularity. I corrected this flaw in the redesign. 3. For the heat break fan bracket, I redesigned the screw hole that attaches it to the heatbreak. Originally, a longer screw was required; instead, I utilized stock screws and thinned out the attachment point. I printed the double blower bracket with its flat side facing down on the bed. Conversely, for the heatbreak fan bracket, I printed it standing upright on its flat side as shown in the image. Note that I still utilize the stock hotend. Updated: Added a bed levelling sensor mount version