CPU Delid tool 771/775/1150/1155/1156/1151

thingiverse

Needed parts: M8 bolt M8 nut One cent coin. Printing advises: Print both parts with 100% infill. Part two should have at least that much. Two hundred microns will do, but a better option would be to print in one hundred to one fifty microns. Working even with PLA plastic is possible. You can use lubricant on the rail, such as lithium grease. Compatibility: All non-soldered Intel LGA CPUs measuring 37.5mm are supposed to be compatible. Most of these were made for generations from 775 to 1151. The exception is the 1156 model, which was not tested due to being soldered. I am not responsible for CPU damage or other issues that may occur. I share a functional and tested tool. You are responsible for what you do with it. Before attempting delid, be sure your CPU does not have internal paste or indium solder. If you encounter sliding problems, check that you removed any support trace, had your printer calibrated, and were not printing too fast. Upcoming: A better version of the tool is in progress. It will allow for re-deliding. I plan to upload it when finished, which should be sometime around early 2018.