Covid19 Mask Breather Remix (Laser Cuttable, Easy print, Hooks-in-Place)

cults3d

Tested and proven Laser-Cuttable Mask breather Which is also easily 3d-printable. A remix of the Mask Breather by 1sPiRe. Easy and fast mask "spacer" that allowes you to breathe and talk more easily. Four different sizes,. Each model is also adjustable to add or reduce the clearance between the mask and the mouth. This is for comfort only, designed for people that have to wear a mask all day long. It won't fight the coronavirus. Use it at your own risk! I found the "early" original version difficult to assemble so i re-designed it to make use of these sliding-in hooks. This version prints completely flat which should "in theory" also make it suitable for lasercutting. (No longer a theory, it works) Laser Cutter-files 16-11-2020 23:01 hours Uploaded the latest .SVG files which i have been succesfully cutting with a local partner here in The Netherlands. The files that we cut here have "Made in NL" engraved in them. I've left the right side of the frame blank so you can engrave the country your version was made in. Line width = 0,2mm. Blue lines = Cut, Red lines = Single line engrave. 22-10-2020 21:01 hours Uploaded the new .SVG files, changed the size marker and got rid of the logo. Sorry @1Spire, final version for mass production will receive the logo by pad-printing. 22-10-2020 20:46 hours Working on the new .SVG files and getting them ready for upload 21-10-2020 09:35 hours Picked up the first lasercut prototype from a local cutting company. The protoype was cut from 1mm thick clear PETG sheet. Embedded logo seems to be a structural weakness. Took almost the same time cutting the logo as the entire silhouette. 19-10-2020 22:51 hours Added Laser-Cuttable .SVG files, with Size and Original designers logo embedded. 3D-print files 19-10-2020 21:18 hours Updated to latest design from 1Spire with the remixed Hooks. New models in S, M, L and XL. Did some testing with Skateboard Griptape on the mask side of the model. it helps with holding is snuggly in place. Just apply two thin strips to length of the breather. Make sure to set the setting "Hole Horizontal Expansion" to 0.3mm or the tabs might fuse together on the sides. 12-10-2020 20:51 hours Added L and M versions 12-10-2020 19:20 hours Only XL version as of yet, working on the other sizes and also tabs.