COVID-19 "Sweden" Visor (Bulk Print Remix)

thingiverse

This is a remix from the great "Swedish" face shield [3D-PRINTED PROTECTIVE VISOR by 3DVERKSTAN](https://3dverkstan.se/protective-visor/). Two main benefits are: * Bulk print friendly (x3, x4 at a time) * Small printer friendly (eg. Makerbot/Flashforge) This remix splits the model into 3 pieces and adds joints. This design doesn't change overall dimensions of the visor, so the plastic sheet can be attached exactly same way as the original. Models (North America 6-hole version) are derived from [their US 6-hole version](https://github.com/Cederb/Faceshield.nu/tree/master/North%20America%206-hole). Please print these. Please use PETG. ABS has known difficulties due to shrinking. * CV4 North America vxx Front.stl * CV4 North America vxx Left.stl * CV4 North America vxx Right.stl If those joints are too tight, please replace Front piece with this. This has wider gap 0.2mm that was 0.1mm by default. * CV4 North America 0.2mm vxx Front.stl Please refer to [Their face sheid instructions](https://github.com/Cederb/Faceshield.nu/blob/master/North%20America%206-hole/US_Face_Shield_Instructions_%26_US_6_Hole_Template.pdf). Models (Sweden 8-hole version) are derived from [their Sweden 8-hole version](https://github.com/Cederb/Faceshield.nu/tree/master/Sweden). Please print these. Please use PETG. ABS has known difficulties due to shrinking. * CV4 Sweden vxx Left.stl * CV4 Sweden vxx Front.stl * CV4 Sweden vxx Right.stl If those joints are too tight, please replace Front piece with this. This has wider gap 0.2mm that was 0.1mm by default. * CV4 Sweden 0.2mm vxx Front.stl Please refer to [their template PDF](https://github.com/Cederb/Faceshield.nu/blob/master/Sweden/Templates%20%26%20Laser%20Cutting%20files/Template-shield-SWEDEN-A4.pdf). Models (Europe 4-hole version) are derived from [their Europe ISO838 4-hole version](https://github.com/Cederb/Faceshield.nu/tree/master/Europe%20ISO838). Please print these. Please use PETG. ABS has known difficulties due to shrinking. * CV4 Europe vxx Left.stl * CV4 Europe vxx Front.stl * CV4 Europe vxx Right.stl If those joints are too tight, please replace Front piece with this. This has wider gap 0.2mm that was 0.1mm by default. * CV4 Europe 0.2mm vxx Front.stl Notes for further remixes: I've uploaded Fusion360 native files including the joint (PushJoint). Basically you need to make a 10 mm x 10 mm hole on the frame body, eg. left side, and then split the frame by using the left edge of the hole. Please refer to each frame files for details. Acknowledgments * [3DVERKSTAN](https://3dverkstan.se/protective-visor/) - My model derives from their great work that is published under CC-BY-SA 4.0. * [#900KMaskMission](https://www.facebook.com/groups/209781503693623/211190256886081) - we are donating 3D printed visors to health care workers in WA. Changelog * 04/18/2020 Added Europe version upon request. * 04/01/2010 Added Sweden version upon request. * 04/01/2020 Fixed a bug in License. Changed to CC-BY-SA.