COVered19 Face Shield DIN A4/A5 Gesichtsmaske

thingiverse

Covered 19 Face Mask Light-Pix Version Modified Face Shield Mask for A4 or custom-cut A3 Laminating Film. Loch Spacing DIN A4 Standard 80mm Benefit: The shields can be quickly and affordably replaced as needed. -100 sheets cost around $20 Print Settings: Diameter of the tip set to 0.6 and at least 3 walls - Filling 0% Set Nozzle Diameter to 0.6 and choose 3 Perimeter - Infill 0% Required: 1x Printed Headband (1x Printed Lower Section) 1x A3 or A4 sheet, for example laminated Laminating Film (>250micron, transparent overlay PVC (>0.3) or thin Plexiglas plates 1x Punch gasket 10-25mm wide, 30cm long or similar Self-explanatory assembly: 1. Headband with rubber band equipped 2. A4 sheet in landscape format or A3 sheet in portrait mode with standard 4-hole drilling. 3. With scissors round off both sides 4. Drill holes on the middle pins at the headband and clip the two outer ones in tension 5. Excess film on both sides hang behind the latch (6. Printed Lower Section below the film insert (Can also be fixed with a drop of glue.)