Counters for Games, Tabletop, Cards

myminifactory

A set of multiple color counters for games: 9 positive 9 negative 10 neutral From 0 to 9. They can be used in any kind of card, and/or tabletop game that requires this kind of +1, +4, 7 or -9 counters.  They are quite small, only 12 mm from flat side to flat side. A simple holder with click action is included.  These counters were designed for FDM printing and they look their best when printed with multiple colors (and they were designed for 3 colors).  How to Print To print them in these three colors, you need to set the layers properly. The slicer should create 6 layers, each 0.2 in height (if your slicer does something different, you need to experiment a bit with the placement of color change). I use Pruse Slicer and it works quite well. Set the layer hight to 0.20 (the counters were designed with 0.2 layer in mind). Use 0.4 mm nozzle. Print 3 bottom layers in one color.  Set color change for layer 4 and print layer 4 and 5 in the second color. Finally, set the color change for layer 6, and print the last 6th layer (the sixth layer is the white outline). I like to print the bottom layers in a vivid color; middle layers in dark grey or black; and the last thin outlines in white. The holder can be printed in any way you want, although you may need to add supports for the top part. If you want to increase the counters in size, do this in X and Y axis, but skip the Y axis (meaning, don’t scale up in Z axis) to keep the intended number of layers correct.