Cotton Pad Dispenser

prusaprinters

<p>Dispenser that allows 1 package of cotton pads (diameter 60mm length 200mm).<br/> Fill it from the top, dispense at the bottom with proper access.</p> <p>It is supposed to be wall mounted using two round head screws (parker), diameter 4mm.</p> <h3>Print instructions</h3><h3><strong>Category: Bathroom Print Settings</strong></h3> <p><strong>Rafts:</strong> No<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> 0.2mm<br/> <strong>Infill:</strong> 10%</p> <p><strong>Filament:</strong> Any PLA or PETG</p> <p><strong>Notes:</strong><br/> Designed to be 3D printing without support material.<br/> 2 perimeters and 10% grit infill worked for me. I used white PLA.<br/> Brim advised to keep the mounting surface flat.</p> <h3><strong>How I Designed This</strong></h3> <p>My design was inspired by a flimsy dispenser that we once received for free with a pack of cotton pads. We liked that one, but it had broken long time ago, mainly because it had only 1 hole for hanging</p> <p>This design is much sturdier, having 3 mm wall thickness, a proper contact surface for wall hanging and having 2 mounting holes.</p> <p>Too steep overhangs have been prevented in the design, so it can be printed without support material. At least, it worked for me.</p>