Cotton Pad Dispenser as Prusa Mount

prusaprinters

<p>When I saw Anwira's <a href="https://www.prusaprinters.org/prints/15619-cotton-pad-dispenser">https://www.prusaprinters.org/prints/15619-cotton-pad-dispenser</a>, I printed it but then wished it to be mountable onto my future Prusa MK3S, since I use these pads to degrease the print surface. I modeled it after Anwira's idea with somewhat thinner walls.</p> <p>It can be mounted behind the Z-axis-top-right part, using a longer screw for the left one. As can be seen in the photo, I made an opening for the wrench socket that I have to tighten the M3 nut. The dispenser sits just above the PSU.</p> <p>It is made in 2 different heights:<br/> -) 107 mm - this one ends with the top end of the Prusa frame<br/> -) 160 mm - this one extends longer and has more capacity</p> <p>Be warned, some people might find it dangerous to mount combustible material above the PSU which may produce flames if faulty.</p> <h3>Print instructions</h3><p>Rotate by 270° around the x-axis, and print without support.</p> <p>15% infill seems enough.</p> <p>I used PETG, but PLA should be suitable as well.</p>