Corner connector

thingiverse

Designing corner brackets for a custom cabinet to hold my Creality CR-10S 3D printer is a great DIY project that requires some creativity and basic metalworking skills. First, I need to determine the size of the brackets to ensure they fit perfectly around the cabinet's corners without any obstructions. To achieve this, I'll measure the dimensions of the cabinet's corner posts and compare them with the CR-10S's dimensions to figure out how much space is needed for each bracket. Once I have these measurements, I can calculate the length and width of each bracket and make a list of materials required. Next, I'll cut two identical brackets from 1/4 inch thick aluminum or steel sheet using a metal cutting saw or a CNC machine if available. If not, I can use a jigsaw to cut them out by hand. After cutting, I'll deburr the edges to prevent any sharp corners from scratching the cabinet's surface. Now, let's talk about the design itself. I want the brackets to be sturdy and securely hold the CR-10S in place while still allowing for easy removal when needed. To achieve this, I'll create a simple yet effective design that consists of two main parts: the base plate and the support arms. The base plate will be attached directly to the cabinet's corner post using screws or bolts, providing a stable foundation for the bracket. The support arms will then be attached to the base plate, extending outwards to hold the CR-10S in place. I'll make sure the arms are spaced evenly apart and securely fastened to prevent any movement or shifting of the printer during operation. With the brackets designed and cut, it's time to assemble them. First, I'll attach the support arms to the base plate using screws or bolts, making sure they're securely fastened and evenly spaced. Next, I'll attach the base plate to the cabinet's corner post, ensuring a snug fit and even alignment. Finally, I'll place the CR-10S on top of the brackets, carefully positioning it to ensure proper alignment with the support arms. Once in place, I'll tighten the screws or bolts holding the bracket together, securing the printer firmly in position. With the brackets securely attached, my DIY cabinet for the Creality CR-10S 3D printer is complete!