Corner Angle Grinder Base (45°-90° cut)
prusaprinters
<p><strong>Printing Info: </strong>None of the parts needs support or build plate adhesion. Minimum infill: 35.0% If you like something more stable you can print with 40.0% infill and double wall thickness. </p><p><strong>IMPORTANT:</strong> Due to screws that apply to the surface you need to double or triple “top layer thickness” or add more layers on top. </p><p><strong>Assembly Instructions :</strong> </p><p>To assemble the model you need:</p><ul><li>4 wood (or metal) screws 3.5 x 5.0 </li><li>4 bolt rings 4M (or 5M)</li><li>3 bolts M6 x 80</li><li>3 nuts M6</li><li>5 bolt rings M6 </li><li>2 ring clamps </li></ul><ol><li>Screw the <i>ConrerGrinder_Base </i>part on the cutting surface<i>.</i></li><li>Place <i>the ConrerGrinder_RM </i>part in the Base gap.</li><li>Place an M6 nut on the front side of <i>ConrerGrinder_Base.</i></li><li><i> </i>Put an M6 Screw from back to front (enters the ConrerGrinder_RM downhole).</li><li>Put an M6 Screw with a nut in the sliding gap through the up hole in ConrerGrinder_RM.</li><li>Place <i>ConrerGrinder_Handle </i>in <i>ConrerGrinder_RM</i></li><li>Pass the last M6 bolt and tighten up with a nut </li><li>Put Corner grinder on top and tight up with clamps.</li></ol><p>You can use CG_Nut_head to cover nuts & ConrerGrinder_Screw_head to cover Bolt heads.</p><p> </p><p> </p><p> </p>
With this file you will be able to print Corner Angle Grinder Base (45°-90° cut) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Corner Angle Grinder Base (45°-90° cut).