Cornelius keg ball lock hose flusher

prusaprinters

<p>This holds the poppet valve open, seals and allows the hose to be flushed, I needed 2 (of each)for my keg transfer lines with an inlet or outlet both ends.</p> <p>The black version is 15.5mm diameter body and the white is 16mm.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Solidoodle</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Solidoodle 2 - Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.3</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>70%</p></div> <h3>Post-Printing</h3> <p>Print topside down, worked for me with no support.</p> <p>There is a small 0.5mm deep groove near the top for an O ring, it will probably not be large enough but I left it more as a guide so you can cut a larger O ring slot with the edge of a square file, or a nail file if you have time, or teeth if you want..</p> <p>With the O ring in place it does actually seal, I had issues getting water through it without the seal in place.</p> <p>If you find you cannot push the thing in far enough to get the balls to lock, then use a screwdriver to deepen the hole for the pin in the top, it should be ok though, only opens the vale a mm or so.</p> <p>designspark mechanical files included if you want to modify.</p> </p></p></p> Category: DIY