CoraQuest Insert/Organizer: Minor remix for sleeving

prusaprinters

<p>I had a fun weekend printing out the OP organiser by Rhindon. Looks great, and a lot of thought has gone into this. But once I sleeved the small cards (FFG Red - Mini European), they did not fit flat, so I took an edge off the holders in Tinkercad to stop the cards from bending.</p> <p>Other Mini-Euro sleeves may be okay, but it is FFG I have here.</p> <p>I have some sleeves for the big cards on the way (MTL Card Sleeves THICK TS90) so will update here when they arrive.</p> <p>Update: yup, the holder for the 90x90mm tiles (dungeon, PCs, monsters, etc) needed tweaking once the MTL card sleeves arrived. There was some play in the box, so in Tinkercad I increased 2 sides by 0.6mm and then made a hole inside the size of the stacked sleeved cards. Group the shapes together and the walls are thinner, but all fits in the game box and holds the cards in place.</p> <p>Update2: I used the same technique on the cardholder I had remixed earlier by removing a wall, and here got two thinner end walls that fit in the box. In as "CQ_Cards_2x_remix v2.stl", the long edge is 1mm longer, and fits the Mini-Euro sleeves as well as inside the game box.</p> <p>Thanks to OP for a neat design.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Artillery Sidewinder X2 (0.4mm nozzle)</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div> <p><strong>Infill:</strong></p> <p>15%</p> <p><strong>Filament:</strong></p> Sunlu PLA <p>Grass Green</p> </p></p> Category: Toy & Game Accessories