CooliPi 4B HAT and FAN mounts

prusaprinters

<p>Frames for mounting large HATs and a FAN to the CooliPi 4B heatsink/case combo.</p> <p>See more info at www.coolipi.com<br/> Shop at www.sensoreq.com</p> <h3>Print instructions</h3><p>These are mounting frames for a <strong>Raspberry Pi model B</strong> case named <strong>CooliPi 4B CASE</strong>, for use with a real aluminium heatsink sold by www.sensoreq.com</p> <p>If you have <strong>Prusa i3 MK3/S, 0.4mm nozzle diameter</strong>, you can use the gcode directly. Print material PETG. Not tested with other materials. Exported with 100% fill.</p> <p>You may use the 3mf project and change any other print parameters, including material, but be aware of the scale factor - thermal contraction may be different.</p> <p>The parts are increased by 0.3% in slicer because of thermal contraction of PETG after cooling. Fine tune yours. Not critical though. 0.3% was ok for PETG for us.</p> <p>In other words, gcode has the <strong>0.3%</strong> increase in it.<br/> The 3mf project has the <strong>0.3%</strong> increase set for this part.<br/> Source STL files are in <strong>nominal</strong> dimensions.</p> <p>Print orientation is visible on the pictures. No supports needed.</p> <p>This is to be used only with a CooliPi 4B CASE with a aluminium heatsink from <strong>www.sensoreq.com</strong>, or you can print a mockup of that heatsink first, to evaluate its size and aesthetic. It's in the collection under CooliPi 4B heatsink MOCKUP name.</p> <p>See more at <strong>www.coolipi.com</strong> . Source files are in Download section in the menu.<br/> Shop at <strong>www.sensoreq.com</strong></p>