CooliPi 4B CASE for Raspberry Pi 4 model B

thingiverse

Cooler case for a Raspberry Pi 4 model B. To be used only with an anodized aluminum heatsink sold by www.sensoreq.com. You can print a CooliPi 4B heatsink MOCKUP of the heatsink and evaluate the sheer size and aesthetic of the set. It's in the Coolipi 4B collection. See more info at www.coolipi.com Shop at www.sensoreq.com This is a Raspberry Pi model B case named CooliPi 4B CASE, for use with a real aluminum heatsink sold by www.sensoreq.com The VESA 100x100mm stand under the case is in another set, see our collection. Recommended print material PETG. Not tested with other materials. You may use the 3mf project and change any other print parameters, including material, but be aware of the scale factor - thermal contraction may be different. The parts are increased by 0.3% in slicer because of thermal contraction of PETG after cooling. Fine tune yours. If you print it a bit bigger, no problem. The real aluminum heatsink has 87x66mm base, it must fit into a 87.4x66.4mm frame cutout in the case. 0.4mm is reserved in each direction, but try to print with the closest scale possible. 0.3% was ok for PETG for us. In other words, the 3mf project has the 0.3% increase set for this part. Source STL files are in nominal dimensions. Print orientation is visible on the pictures. No supports needed. This is to be used only with a CooliPi 4B aluminum heatsink from www.sensoreq.com, or you can print a mockup of that heatsink first, to evaluate its size and aesthetic. It's in the collection under CooliPi 4B heatsink MOCKUP name. The VESA 100x100mm base can be printed, but is in another set in the CooliPi 4B collection. The HAT frame and a FAN frame are also in a different set in the collection. See more at www.coolipi.com. Source files are in Download section in the menu. Don't forget to show it to your friends!