Coolermaster NR200/NR200p SPC vertical pump mount

prusaprinters

<p>So I decided to transplant my old loop with an EKWB A240G aluminium loop into an NR200p. Seeing how it is recommended to have a EK-XRES 100 SPC-60 MX PWM (incl. pump) in the vertical orientation (according to the manual). I decided to make a bracket to keep it as such.</p> <p>The case already had holes drilled to keep it in a horizontal orientation, so it was a matter of making a small plate with the holes in the right space (50mm distance between them) and making a panel with the same holes attached to it in a 90 degree angle.</p> <p>It has a bit of flex downwards, could perhaps be supported even better, but it can keep the pump up without worries when the reservoir is entirely filled.</p> <p>Attached the pump to the bracket and the bracket to the case via</p> <ul> <li>8x polyamide washer M4</li> <li>8x screws M4x6</li> <li>4x nut M4</li> </ul> <p>These happened to be screws I had laying around from a EK-UNI Pump Bracket. Washers are optional (but they were included with the screws and I did not want to lose them.</p> <p>In the pictures you can see my original version. In which I had to make some adjustments, this is already corrected in the uploaded model.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Filament:</strong> 123-3d Jupiter PLA Grey</p> </p></p></p> Category: Computer