Cookie Run: Kingdom - Latte Cookie Staff

cults3d

This model is cut into 12 pieces to fit in my Ender 3 with platform size of 200mm x 200mm x 200mm. There tunnels of 10mm and 5mm punch through the model for alignment and bone installation purpose. To make it easier for post processing, it is suggested you print them in upward position, so that there will be no support apply to the tunnel. If you cant find anything with 10mm or 5mm diameter, you can print the "peg" file included. They are cylinder with diameter of 9.5mm and 4.5mm respectively. For the pieces near the scoop, you can refer to the picture in the preview section for the arrangement on the build plate. There is number of support needed for that part. If it is too difficult to remove support on tunnel from pieces 10, you can skip removing it. You can drill a hole using that as a guide for alignment and bone installation if you want. Once printed all the pieces, glue them together using superglue or any other suitable adhesive to complete the prop. Just in case you need the uncut version, it is included as well. For scaling, please use the same scale for all the pieces. Cheers and Happy Printing!