Cookie cutter Halloween Ghost 3D print model

cgtrader

Dimensions: 59 x 58.5 x 12.2 mm Optimized print settings are crucial for producing a perfect model, as shown below: Material selection: We recommend printing with PLA plastic for its strength and flexibility. Heating system calibration: Adjust the nozzle to 0.38 mm in diameter to ensure precise layer formation. Use a controlled temperature of 195°C during the entire print process. Layer structure adjustments: Print at a precise 0.2 mm height, with an initial layer thickness of 0.35 mm to minimize warping and sagging. Use 100% density for wall infill to guarantee stability. Retraction mechanism tuning: Enable the retraction system, allowing it to work when not printing or if excessive material accumulates near the extruder nozzle. Max comb distance is limited to 18.5 mm, with Z-axis offsetting in retraction mode activated by default. This feature minimizes stringing and provides precise control during retraction sequences. Boundary formation techniques: Optimize adherence with the printing tray using a custom skirt mode. Two layers of boundary support provide extra structural stability around model corners and edges. Maximum comb distance: 14 mm, Skirt border design Use a total of four (4) line strips of 3.25 inches long at .45 inch apart, for maximum strength, print on first or second layer to get optimal results