Control box for SKR v1.3

thingiverse

BIG FAT DISCLAIMER: This is the first time I've ever touched a CAD package, so if you want to tell me I've done something completely backwards, well I probably have. In the pictures, you'll notice the fit is incorrect. This is due to a piece of the case that's warped thanks to a roll of Hatchbox white PLA which turned into hot garbage about halfway through. I'll be reprinting that piece and reposting when it's done. Will fit SKRv1.1, v1.3 and MKS Gen L. Designed for the SKRv1.3, you may need to move the USB and SD card slots for other boards. This is a remix of https://www.thingiverse.com/thing:2751907. Jim's box is great but I have fairly large hands for a regular-sized person, so fiddling around with small wires in small spaces drives me nuts. As such, I wanted a bigger box where I could do a decent amount of work and then put the box together after the bulk of the wiring was done. I also wanted to get rid of messing around with screws, so everything should snap together. In addition, there are 2 slots in the front where 4010 fans can drop in without screws. Update 4/5/2019 - I tightened up the fan holders and cut away a piece so there's room for the wiring. Update 20/3/2019 - I changed some of the tabs around for better fits. The base and front have printed well, and the fan slots have the right amount of clearance, at least for my printer anyway. All joining surfaces have a 0.2mm clearance, and that seems to work well. Update 24/3/2019 - Now I've actually got the board, so I could test fit it. Needed to move the SD card opening a touch and removed a slot to re-add some strength which may have been lost as a result. Calling this one finished.