Control Board - Creality + Mosfet

thingiverse

Hi everybody, This is a control panel used in my Ender 5 for my V1.1.5 and Mosfets. Basically, there are three modules: 1) The display module, for the original 12864. 2) The electrical part, for the V1.1.5 and Mosfets. 3) The 80mm fan holder. Then there are two prints more: 4) The fan protector in honeycomb shape. 5) The lid. The first three modules are assembled together with four M3 screws, eight millimeters long recommended. Sorry, I am not a professional designer and there are some points to improve. You may get a five-millimeter screw and get a bit short but functional, or ten millimeters and be a little bit long which wouldn't matter in terms of practicality. The lid is easy to mount and it has been designed to have a couple of six by three magnets. One on the one that holds the box closed, and other one in the joint in the fan module. The mosfet board holders are for fifty by sixty millimeter mosfet boards. I would recommend placing them with the cables looking to the display. BOM used: M3 screws between five and ten millimeters. Mosfet: https://www.amazon.com/gp/product/B077HP7XX9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Fan 80x80x25: https://www.amazon.com/gp/product/B00HKF1LTW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 UPDATE 01/05/2020: By great suggestion of Alferro7 and because I never liked how to install the display in my first version, I include two changes: - The model for the electrical part, the middle module, now it is reversible. You can place the box at the right or left of the printer. You will find that the holes for assembling the three parts now are symmetric and you can turn the middle part. - The display module now it's made of two separate parts, once you screw the display in a plaque, you can place and screw this plaque into the main body. Much easier to mount.