Contour Filaflex protection

thingiverse

Body Protection System: Shell Housing for Camera Contour: Lens Cover Material Options: For the Lens Use a 2mm Thickness Glass or Acrylic Frame Height Printing Details Brand of Printer: RepRap Brand Model of Printer: hephestos Infill Pattern Level: 100% Special Printing Notes: layer height equals .20 Wall thickness value equals 0.8 Retraction Function Is enabled Thickness Value for solid layers: 1 Fill density rating: 20% Nozzle Size Rating: 0.4mm Printing Speed Rate: 20 Units Per Minute Printing Temperature Level: 235 degrees Celsius Heated bed temperature level: 70 degrees Celsius Diameter of Filament Material Used: 1.75 mm Filament Flow Setting: 100 percent flow rate Speed Limit for Retraction Action: 22 Units per second Minimum Travel Distance during retraction action: 2.5mm Dual Nozzle retraction amount: 16.5 units Combining Retraction Method with: All Options available Minimal extrusion level before retraction occurs: 0.02 units Retraction distance offset: 0 Base layer thickness: 0.3 mm Adjustable print settings width factor value for the first layer equals 100% Maximum travel speed for printer: 150 units per second First layer speed rate during base layer printing process: 20 Units Per Minute Heated bed with fan is enabled during print operation Support Material Fill Rate Option Set at 15% Horizontal support material spacing distance equals .7 mm Vertical support material distance offset value: 0.15