Container crane N 1:160

thingiverse

Model N 1:160 ==================== Moveable container crane for model railroad --------------------- This container crane is based on a design I found online. It can move it's arm up and down and it can rotate 360 degrees. The open door in the concrete bottom part has a hallway to the right that makes it look like there's a spiral staircase to the top. **Finish with copper wire** For scale N 1:160 / 1:150 this model needs some black copper wire to finish the model. I bought some from Aliexpress for a few bucks. A wire that's 0.2 or 0.3mm in diameter is perfect for this model. On top of the container crane are holes to fit in the wires. The holes on the front of the model are for the arm going up and down and the wires for making the container itself go up and down are going over the half-rounded glider on top and into the holes on top of the building. To cover this all up and make it look more realistic, glue the top square plate in place. **The container holder** The holder itself is on scale and should fit over any container (10FT, 20FT and 40FT). There are three bars on each side, cut away the middle one. This one is only there to make sure everything can be printed without support, it does not have a purpose. **Happy with it?** If you created this design and your happy with it, I would really appreciate it if you'd buy me a coffee or a beer. Feel free to make a donation through my PayPal account! **File list** _Container crane N 1:160_ - The complete container **Copyright and licenses** Feel free to print this design and use it in your home. I'd love to see images of your creation! But this design has a copyright, licensed under the Creative Commons Non-Commercial. This means this design may not be used for selling but feel free to use it in your own home.