Connector set for 100mm 10cm dryer duct

thingiverse

This is a collection of printer housing accessories. I designed these to eliminate printing fumes. They were especially useful after installing a laser diode for engraving on my Anet A8. This set is meant to be attached to an existing printer housing, which in my case was made from polycarbonate. All you need are four small holes for the screw and a 30mm hole for the air vent. The air vent opening is kept small so that you can use a standard 32mm step drill, as the output port of the fan is approximately the same size. I hope these parts are self-explanatory; if not, just send me a message. This set contains: * One adapter for a 75mm radial fan (designed specifically for the Titan TFD-B7530M12C) * One outer plate for housing that fits a dryer air exhaust hose (100mm) * One adapter for the other end of the hose, suitable for small window gaps (hangs on a tilted window) * One adapter for the other end of the hose, suitable for larger window gaps (hangs on a tilted window and provides better airflow) * One adapter for the other end of the hose, suitable for larger window gaps (hangs on a tilted window and blows air downwards) * One customizable counter plate that allows you to fit your own fan sizes to this set Most of these files should be printable without a raft or supports and with a 0.1mm layer thickness; however, the fan adapter needs support but not a raft. All parts are designed to be printed with the flat faces of the plate facing downwards, and the window hangers must have their top face down. Depending on your print quality, you might encounter small overhangs between the inner supporting walls, which I removed as far as possible using needle-nose pliers. Reminder: Printing the window hangers with support will most definitely render your print useless, as you won't be able to remove the support material. That's why I included those walls in the first place. Happy tinkering!