Configurable bike and scooter phone holder

cults3d

A bike and electric scooter phone holder with changable width. The parts are seperate for easy printing and for allowing changing each part to different part of your own, like replacing the wheel mount to a car mount for example. Bolts and nuts: - 1 x 3M * 70+mm - 3 x 4M * 20mm - 1 x 3.5M * 10mm With matching nuts, nylock nut are recommended. You can choose to print wheel_nount_2__m365 instead of wheel_nount_2__general if you have a m365 scooter. This part attach to the gap exist in m365 wheel to insure the mount would not flip due to the weigth of the phone. The phone mount can attach to any ~22mm diameter wheel. How to print bracket_2: This object has a hidden space inside it, that fits a 3M nut. I used cura to track the last layer of this space and stopped when reached. Then, I inserted the nut and continue printing. This way, the nut is buried inside the part. I flipped this part that it would stand on the wider face. You can learn how to stop the printing in layer in CHEP's video: https://www.youtube.com/watch?v=1nBnVtOEAiY&t=71s In the images you can found the way to print and the space saved to the nut in bracket_2.