Concrete mixer 1:14

cults3d

Professional concrete mixer shown on a scale of 1:14 Many parts are mobile, so it is possible to assemble it in different positions. The dimensions of each part have been made a more accurate to limit the games in the mechanisms. Thus it will be necessary to adjust has the mini file, each assembly, if you wish to keep the mobile parts. For the assembly, there is an order to respect. put the balance on the frame glue the flywheel in the balance wheel (grease the part of the flywheel axis to be mobile or glue in the frame to leave fixed) place the pinion in the frame glue the concrete mixer axle into the mixer (grease the part in the balance wheel to make the mixer turn, or glue with the balance wheel to stay fixed). If you want the pinion to drive the mixer. it is assembly must be very precise, otherwise the teeth jump. glue the motor cover, then fit the cover the files PIED and AXIS PIED must be printed in 4 copies. There are 3 positions of settings, to install the feet. the WHEEL and WHEEL AXIS files will be printed in 2 copies. and finally the tiller. To finish, it will be necessary to make the rod of the locking pedal from a piece of 10cm of rigid wire in 1.5mm ² In the engine box, there is the possibility of putting a small motor. But beware the teeth of the pinion and rack being to scale, it will only work if all the assembly has been done with care. WARNING, if you buy this model, you accept the license which does not authorize you to trade it, neither by reselling the STL files nor by making models from these files for sale.