Components Box - Bauteile Box

thingiverse

The component box was one of the first things I developed with OpenScad. Now that I had to print one again, I thought it would be great to share it here. Maybe someone else could really use it. The whole project consists of 3 OpenScad files, which I'll happily make available to you. With hpBox.scad the STL of the box and its matching lid is configured and created. To ensure that the lid stays in place, two magnets can be inserted (for example, 3mm*11mm), with a diameter that can be chosen within limits. With hpSchachtel.scad the STL of the component containers is configured and generated (for example, 20mm*20mm). In each container, a small pocket can be added where a label fits to identify the component. Initially, I had only planned the box for SMD components. Therefore, you can slightly thicken the stone walls where a plug will fit in. This prevents a component from moving unintentionally from one box to another ;-) which is very annoying with small SMDs. If the components are secured with a plug, you can transport the box calmly. The STL of the plugs can be configured and created using hpStopfen.scad. Print parameters: 30% filling density 0.2mm layer height 3 vertical contours 3 horizontal contour envelopes 60mm/s print speed Support is not required With a successful print, I would really appreciate a Like!