Compliant Phone mount
prusaprinters
<p>Compliant cell phone holder.</p><p>I wanted a phone holder in my car that was easy to use. I can use one hand to put my phone in the holder and remove it.</p><p>I used PolyCarbonate to print this so that it would take the heat in the car. should be able to use PETG as well</p><p>I used alien tape to attach the base to the dash.</p><p>I used a piece of filament for the three hinges. you may have to drill out the holes to clean the inside. then I used a soldering iron to melt them in place on the ends</p><p>Category: Mobile Phone</p><p> </p><p>New ball mount and stronger spring use 20 x 3mm screws and nuts to mount the ball to the stand and the clamp together.</p><p> </p><p>the spring, you will need to add supports and 100% infill</p><p>for the ball, also print at 100% infill as well</p><p>all the parts are correctly orientated for printing</p>
With this file you will be able to print Compliant Phone mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Compliant Phone mount.