Compact Hemera Mounts for 40mm fan, 18mm and 12mm probes, filament sensor, and HyperCube carriage

prusaprinters

<p>This is a set of mounts I designed for mounting the E3D Hemera to my HyperCube build.</p> <p>The blower fan and probe mounts should be compatible with any other printer if you'd like to mix it with another carriage design.</p> <p>Included parts:</p> <ul> <li><p>12mm probe mount.</p> </li> <li><p>18mm probe mount, e.g. the EZABL.</p> </li> <li><p>Filament sensor mount, with holes for optionally attaching an drag chain. Also included text for multi-material printing.</p> </li> <li><p>40mm print cooling fan mount. This part sits very close to the heat block, printing in ASA/ABS is recommended! PETG also probably works, but I haven't tested it.</p> </li> <li><p>Carriage mount for the original HyperCube. I can probably figure out EVO mounting holes if there's interest.</p> </li> </ul> <p>M3 screws needed: 6mm x2 (probe), 8mm x 4 (blower), 10mm x4 (carriage), 25mm x2 (filament sensor)</p> <h3>Print instructions</h3><p>Print the blower fan in ABS, ASA, or another material that can handle heat well. PETG may work, but is untested.</p>