Compact 40 Watt 4,000 Lumen LED Shop Light

thingiverse

This is an incredibly powerful and compact 40-watt shop light that can illuminate my entire street like daytime! This small device has the ability to produce a staggering 4,000 lumens! My shop is about to get lit up big time. The assembly video listed below includes links to all the necessary parts and tools you will need to build it. A GoPro mount can be attached using any GoPro handle or one of our custom handles. A 26mm external diameter acrylic rod is used for our custom rod handle. Assembly Tutorial: https://youtu.be/lTiddPHAx8E Print Settings: Printer: FlashForge Creator Pro Rafts: Yes Supports: Yes Notes: I highly recommend using Simplify3D as a slicing program because their supports are extremely easy to remove and this design uses a lot of supports. Make sure to offset all parts with a raft by 0.3mm or the raft can be challenging to remove. If I don't specify a setting, just use your current setting. MAIN BODY: -Print the body file with supports and a raft in PLA. OTHER: -Print the front LED organizer in PLA with no supports or raft. -Print the back in PLA with no rafts or supports. HANDLES: -Print the pistol grip handle with a raft and no supports. -Print the rod handle with supports and 100% infill. Post-Printing Step 1: Remove all supports When you are done printing, there will be some supports on the mainframe/body and your rod handle extension. Carefully remove these supports using long nose pliers. If there are any other bits of bumpy/sharp pieces of plastic left on the outside of your mainframe/body make sure to remove them with your pliers. Step 2: Assembly Now that you have your 3D printed parts, you can move on to the next step of assembly. We have created a step-by-step tutorial video on YouTube for you all to watch. We hope you all enjoy this project as much as we did!