Community Mailbox Security kit
prusaprinters
<p>Our mailbox kept getting broken into, so I created these deterrents to slow the boneheads down (or at least make them look elsewhere)</p> <p>Our mailboxes have several different lock bezels on the outside, and at least two different styles of lock bodies on the inside.<br/> So far this has been working well for the past year</p> <p>Print using PETG with 50% infill for temperature resistance & sturdiness.</p> <p>Lockramp1 - is meant to be glued around the lock bezel to make it harder to grab the part with a set of visegrips. I used E-6000 glue to hold our in place.</p> <p>Lockbody - is designed to fit over the lock on the inside & engage the rib of the tumbler cylinder & wedge against the inner edge of the door to prevent rotation.</p> <h3>Print instructions</h3><h3>Category: DIY Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> i3 MK2.5</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .2mm layer</p> <p><strong>Infill:</strong> 50%</p> <p><strong>Filament:</strong> Inland PETG any</p>
With this file you will be able to print Community Mailbox Security kit with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Community Mailbox Security kit.