Combatech Solstice laser pistol from the video game Starfield

thingiverse

Update: I have recreated the decals in vector format for printing. A model I made of the Combatech Solstice laser pistol from Starfield. I wanted to challenge myself to design a model and record a good portion of it. Results were about 6-7 hours. I'm not a video editor and wouldn't know where to begin to shorten it. I'm sorry. But it does exist if anyone is interested. The model itself is composed on the grip portion and the front barrel. In game the front barrel is replaced as an ammo reload. So I kept that functionality. The trigger works and only need a 6mm compression spring. I used 30mm but length is flexible. Light sanding in the area it slides in and some lubricant would go a long way to making it work its best. I split the barrel in 3 parts for easier printing minimum supports. There is a lip for the lens that will need support. Glue the 3 parts together with the peg as alignment. The barrel parts consists of the Lens->Lens spacer->Front Spacer->Front Ring->Front Spacer->Center Magazine Conductor. These fit together with the conductor acting as support for all the parts. The grip is 2 halves that are secured with m4 socket head screws. Use long threaded screws on one side to secure the halves and shorter screws on the other for beauty. One screw where the fingers rest as well. The heatsink blades are secured with m4 screws as well. I used button head 8mm long. The lower heatsink holes a very difficult to get to. I screwed in at an angle worked it in. Alternative is to enlarge the hole and glue on the screws and blade. Do not mirror the heatsink blades. They are the same on both sides. Text is always on the left side. I plan to do a build video but I'm still waiting on hardware to finish. But all fitment and adjustments have been made. Hope you can enjoy this!