ColorFabb Economy Spool Holder

pinshape

ColorFabb Economy Spool Holder Print settings: Printed on an Ultimaker 2 Extended + with a 0.4mm Nozzle using Cura slicing software. No Supports, Bed Adhesion is achieved with Glue Stick applied to the glass Platform. Build Plate Temp: 60Deg/C printed in ColorFabb Economy Silver PLA at 210-215Deg/C. https://colorfabb.com/materials/pla-colorfabb-economy-silver-pla Print speed: 60mm/s, Top/Bottom Speed 30mm/s, Travel Speed 150mm/s and Initial Layer Speed 20mm/s. In-Fill Density is set to 20%, In-Fill Pattern is Grid and Layer Height is 0.1mm. Print Time is 17 hours for the SpoolStand, 3 hours 50 minutes for the SpoolAxle_R and 3 hours 30 minutes for the SpoolAxle_L. Axle Pin (Spindle axle): A galvanized steel rod with a diameter of 10mm and length of 142mm. Very light sanding may be required on the thread of the SpoolAxle_R. This model was created using Boolean Operands. Please note that material shrinkage varies depending on the material, brand and color used. If you like this design, please show your support by sharing it with your followers on Twitter #3dprinting and upload pictures of your prints. Happy printing!