Color Lithophane Tulips

prusaprinters

This is a full color lithophane created by using 5 thin layers of cyan, magenta, yellow, and white topped by a regular lithophane. Featured on: 3D Printing Nerd: https://www.youtube.com/watch?v=LzCJV4UOByY&t=1s Thomas Sanladerer: https://www.youtube.com/watch?v=XvLJEXfSl2E 3d Maker Noob: https://www.youtube.com/watch?v=M8-LuYKYmnc This is a very challenging print that requires a multi filament solution such as the Mosaic Palette or the Prusa MMU. I have included the full size and a quarter of the full size so it can be printed on smaller bed printers. Print instructionsUnassociated tags: color lithophane Category: Other Summary This is a full color lithophane created by using 5 thin layers of cyan, magenta, yellow, and white topped by a regular lithophane. Featured on: 3D Printing Nerd: https://www.youtube.com/watch?v=LzCJV4UOByY&t=1s Thomas Sanladerer: https://www.youtube.com/watch?v=XvLJEXfSl2E 3d Maker Noob: https://www.youtube.com/watch?v=M8-LuYKYmnc This is a very challenging print that requires a multi filament solution such as the Mosaic Palette or the Prusa MMU. I have included the full size and a quarter of the full size so it can be printed on smaller bed printers. Print Settings Printer: RailcoreZL 300 Rafts: No</div>Supports: No Resolution: color layers 0.8, lithophane 0.5</div>Infill: 100% Filament: color mixing filaments work best PLA cyan magenta yellow white Notes: This model is created to exactly match my printer settings. The extrusion width in the model is assumed to be 0.4mm, if your extrusion width is different you need to scale the X and Y to match (so if your extrusion width is 0.44 you need to scale the x and y by 0.44/0.4, DO NOT scale Z). The z height on the first 5 layers must be 0.8mm, the lithophane can be any thickness but the thicker the worse the resolution. Check you Gcode before you print!!! Should look like tightly packed squares on the first 5 layers with no gaps - see sample gcode screen capture. The 4 color stl files need to be aligned to origin, the lithophane stl should be raised 0.4mm in z and placed directly on top of the color stl files.