Collets for Tap Holder - easier to print + stronger
prusaprinters
Since the original collets break easily due to the way they are printed I came up with a design that is both easier to print and stronger. Currently there are only versions for a 3mm, 4mm and 5mm drill which I designed as a test in FreeCAD. I will try to add a customizable OpenSCAD version for this. Update 2019-04-17: added customizable OpenSCAD version - not tested yet though! If you print from the OpenSCAD version please comment if there are any problems. Note: the hex-collets probably should be printed using supports. Print Settings Printer: CTC Prusa i3 Reprap MK8 DIY Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: EFORINK PLA Blue Notes: Print the collets lying on the side with the gab vertical (as shown in the picture). Hex-collets probably should be printed using supports. Category: Hand Tools
With this file you will be able to print Collets for Tap Holder - easier to print + stronger with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Collets for Tap Holder - easier to print + stronger.