Coleman Cooler Lid Prop

prusaprinters

<p>I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this.</p> <p>The prop was designed to fit onto the front lip of the Coleman 50qt Xtreme wheeled cooler, but I think it will fit just as well on many of the other Coleman Xtreme series coolers. And, it'll probably work on a lot more.</p> <h3>Print instructions</h3><h3>Category: Outdoor &amp; Garden Summary</h3> <p>I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this.</p> <p>The prop was designed to fit onto the front lip of the Coleman 50qt Xtreme wheeled cooler, but I think it will fit just as well on many of the other Coleman Xtreme series coolers. And, it'll probably work on a lot more.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> Prusa Clone</p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 20</p> <p><strong>Notes:</strong></p> <p>Printed at 0.2mm with 0.8mm walls and 20% infill and it's very strong. Less infill would probably produce a perfectly usable thing with less filament.</p>