Coffee Pad Holder Holder (Senseo)

prusaprinters

<p>This is a holder for coffee pad holders (Senseo) for mounting on the wall. A drain is built in, so that any coffee residues are collected in the reservoir at the bottom.<br/> The holder is attached to the wall with two clips so that it can be easily removed for cleaning.<br/> The clips are simply attached to the wall with double-sided adhesive tape.<br/> I was inspired by the following pad holder: <a href="https://www.thingiverse.com/thing:251074">https://www.thingiverse.com/thing:251074</a></p> <h3>Print instructions</h3><p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0,25</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>Print the holder with raft (better adhesion because it is small and high) and 20% infill as well as 0.25mm layer height and supports.<br/> For the clips you don't need a raft but take a bit more infill (40%) and a layer height of 0.2mm.</p>