Coffee Jar adaptor for Water Pipe

thingiverse

OG Bong Adaptor for Repurposing a Used Coffee Jar, PVC Pipe, and Garden Hose. Version 1.02 (Hose Hole Enlarged for Easier Fitting) Materials: * 50g Recycled Moccona Coffee Jar from Australia or New Zealand * Approximately 160mm of 13-14mm Diameter Garden Hose * About 300mm of 32mm Outside Diameter PVC Pipe, roughly 36mm in diameter Instructions: Remove the rubber attachment from the original jar lid and attach it to the adaptor. To simplify hose fitting, fold the garden hose lengthwise and then twist it while inserting sticks to remove any creases once in place. The PVC pipe fitted well for me; however, I also covered the joint with a short piece of bicycle inner tube for added stability. Print Settings: * Printer Brand: Wanhao * Printer Model: Wanhao Duplicator i3 Plus * Rafts: Not Required * Supports: Enabled * Resolution: 0.2mm * Infill: 0% Notes: Consider adding infill and increasing the 0.8mm wall thickness for added strength; this can be achieved by adjusting print settings accordingly.