Cobi M26 Pershing Upgrade Parts

prusaprinters

Parts:Mantlet and MG port: provide more photorealistic geometries that more closely resemble the real objectsBarrels: 6mm barrel pieces are closer to the real-life scale. They are available in 19 and 38mm lengths, depending on what your printer can achieve. You will need a total of 76mm of length. Regardless of which length you use, you will need one thick peg version to connect to the original barrel sizeMuzzle brakes: available in 6mm and 8mm widths. 6mm is for the modified printed barrel, and 8mm is for if you want to keep the original barrelPost-processing:Parts may require sanding if fits are too tight. Wrap tape around round pieces if they are too  looseDisassembly:Important: do not force parts together if they are too tight, otherwise you may risk breaking themRemove the front armor plate from the hull, and the mantlet assembly from the turretHull Assembly:Disassemble the armor plate to match the following picture. Keep the small tile and the machine gun barrel.Insert the “Hull MG Port” and replace the other partsTurret Assembly:Take apart the mantlet assembly, and keep the following piecesPlace the 1x3 underside plates on the back of the printed mantlet part, and the barrel pieces inside the central cavity.Insert the barrel and muzzle brake pieces into one another, and insert the barrel assembly into the new mantlet. The 4.85mm peg should be on the end.Place both assemblies back onto the model