Coatrack Fitting

prusaprinters

<p>This is a beautiful fitting to attach a 25mm wooden rod (or a pipe) between two walls. Voilà, your new coat rack.<br/> Obviously you'll need two sets of fittings for each end of the rod. Screw the "fitting-screw" to the walls facing each other (measure twice), then insert a rod of appropriate length and fix it with the "fitting-nut".<br/> The magic of 3D-printing allows to design those dynamically shaped ribs that will align perfectly, while the profanity of the application will guarantee that now one will ever notice...</p> <p>For the remaining two to three amongst you who did not convert to metric jet: a 1 inch rod also works, i've left some clearance.</p> <h3> Print Settings</h3> <p><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>0.25</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>high</p></div></p> <p><strong>Notes:</strong></p> <p>I recommend to use high infill for strength if you plan to hang you soaked winter coats. After all there is not much infill volume anyway.</p> </p></p> Category: Bathroom