CNC Clamp 2mm to 18mm

prusaprinters

Clamps for holding down your workpiece on a cnc router. Theclamps are designed for holding down materials with a thickness of 2mm to 18 mm.There are 2 different sizes for the bolt that goes through, M5 or M6.Best is to use a washer on top.The actual foot to hold your workpiece can rotate to adjust to the thickness of your material.This clamp can be used on a wasteboard like this: https://www.youtube.com/watch?v=yhVW6Q9o-34 or on v-slots with an added drop in t-nut.Supplies:1 bolt per clamp M5 or M6 also the lenght is depending on your wasteboard.1 washer per clamp1 drop in t-nut per clamp In case of v-slotsPrint instructionsPrint the clamp on its side. Do not use support !!Print with PETGUse 0.15mm resolution.Use 4 Perimeters for strenght.Make sure your printer is setup well. The foot of the clamp can rotate and there is not much clearence between the parts.The embedded gcode file is with 2 clamps on the printbed. https://www.buymeacoffee.com/paho