Club Car Carryall 500 UTV Golf Cart

prusaprinters

Here is a model Club Car Carryall 500. The .stl is at 1:18 scale but I've been printing my Club Car models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16.I included the flat bed and also the pickup type bed. You can make it with or without the canopy. To make it with a canopy use "ROP_L" and "ROP_R" (I know carryalls don't really have roll over protection, but I don't know what else to call it.) and the "Canopy" file. If you don't want the canopy use "Bar_r" and "Bar_l" which are the arm rest like things. Use either "Bed" or "Flat_Bed" depending on what you want.Print one of everything except you will want to print 4 tires, 4 rims and 4 axles.There are some alignment features for assembly, but you'll probably need some of your preferred model glue.I print the tires with TPU and they pressed onto the rims nicely without any glue needed. The axles needed some fine filing/sanding to ensure a nice fit with the wheels rolling adequately. I put the wheels on the axles then glued the axles to the body. After applying glue, I used my 3d print pen to weld the axles securely and permanently to the body.I also have a Club Car Carryall 300 model which you can find here:https://www.printables.com/model/328585-club-car-carryall-300-utv-golf-cartI have printed this model twice.  which you can see on the Carryall 300 page.  I added a windshield to the white one that I made but that wasn't 3d printed, it was just a piece of clear plastic that I had handy. I also painted the lights and grille. If you are real fancy maybe you'll paint the dash board and emblems too.The carryall 500 features a longer wheelbase and larger bed than the Carryall 300.  The components that are different are noted with a 500 on the Carryall 500 .stl files.  The other parts are interchangeable. The model was made in Solidworks.