Clod Buster Wheel Adapter for Kyosho Mad Crusher

prusaprinters

<p>Adapter to fit ClodBuster wheels on a Kyosho Mad Crusher adding just enough offset to clear the steering knuckles.</p><ul><li>The bolt holes are modeled to fit over the studs on the back of original Clod Buster wheels.</li><li>To drill the bolt holes, place the adapter in the wheel and drill 2.5mm or 3/32" holes through the wheel using the adapter as a guide.</li><li>Remove the adapter and enlarge the holes in the wheel to approximately 3mm. I found that a 1/8" bit can be used while keeping a thin tube form the original studs.</li><li>Mount the wheels to the rims using M3 bolts. 12mm is a good length to clear the chamfer and bite into the adapter.</li><li>Use M5x16 bolts with blue locktite or lock washers to mount the wheels on the axles. Use M5x18 if you are using thick washers like Nord-Lock.</li></ul><h3>&nbsp;</h3><h3>Print Settings</h3><p><strong>Printer Brand:</strong> Prusa</p><p><strong>Printer:</strong> I3 MK3S</p><p><strong>Rafts:</strong> Doesn't Matter</p><p><strong>Supports:</strong> No</p><p><strong>Resolution:</strong> 0.2</p><p><strong>Filament:</strong> Kodak PLA+&nbsp;<br><strong>Notes:</strong></p><p>I used PLA+, but any rigid filament should work as long as you have medium or high infill and use extra perimeters to ensure strong walls for the bolt and hex holes.</p><p>I used 35% infill with 6 perimeters.</p><h3>How I Designed This</h3><p>I designed this hub adapter by modifying the scad script "Customisable SLW Style Hub for RC Wheel" by jruutiai. <a href="https://www.thingiverse.com/thing:2201304">http://www.thingiverse.com/thing:2201304</a></p>