Clipboard slide mount

prusaprinters

I've been wanting a sliding holder for my clipboard. Somewhere easy to see, easy to grab and easy to put away. But I couldn't find anything on the local store. So I came up with this idea: four sliding pieces that can be used for clipboards of every size and shape (as long as the shape is a parallelogram).These pieces can be super-glued or placed using double sided tape on almost every flat surfaceAll the pieces are 30mm squares with 10mm of thickness, they can hold anything that is up to 3,5 mm thickPrint settings:0.2 layer height3 perimeter walls (anything lower that that will make the parts a bit fragile)supports will be necessary (if parts are printed in the default orientation)Infill for CURA users: infill at 12%, so that the internal structure will overlap with the top-layers of the parts, but don't forget to set the infill line direction setting to [0] and the infill pattern to gridInfill for PrusaSlicer users: infill between 10% and 15%Depending on your infill choice, all the plastic used will be somewhere around 15 and 17 grams, print time didn't exceed 1 hour for having all the parts done, but again, it may vary on your print settingsFuture updates will be made if the public finds it necessary