Clip-On Full Bumper for Mi Roborock S6
thingiverse
DESCRIPTION:This is a very sturdy, very low full bumper, to be clipped onto the Mi Roborock S6. Do not want to clue a bumper to your robot, but need a full bumper, not just multiple single clips? This is for you.If you do not need the bumper to be THAT low and you have thick carpets, you might want to shorten it a bit before printing. If you choose to do so, make sure to not harm the clip cut-out on the inner side of the bumper!FILES:Print 4 times, print laying on the side (for sturdiness of the long edge), 100% filling, using support:"Clip for S6 Full Bumper .stl" (extends on https://www.thingiverse.com/thing:4862415 by https://www.thingiverse.com/dds/designs)Print once, 20% filling, using support:Right Part of S6 Full Bumper.stlLeft Part of S6 Full Bumper.stl(extend on https://www.thingiverse.com/thing:5157096 by https://www.thingiverse.com/weidi1/designs)Not for printing (will not be stable and break):Fully Assembled S6 Full Bumper.stlASSEMBLY:!!! Parts need to be force-fitted (eg. carfully using a hammer). Possibly apply a sharp knife very carefully. But do not try to widen/reduce the connectors design-wise. The parts need to sit really tight.Connect in the following order:1) connect left and right bumper part2) attach clips3) clip onto robot4) (optional ;) ) visit my website and read my fantasy novel (German):ajraven.de
With this file you will be able to print Clip-On Full Bumper for Mi Roborock S6 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Clip-On Full Bumper for Mi Roborock S6.