Clip and Pin for Stoeckler Composter
thingiverse
I designed these clip and pin for our <b>Stoeckler Thermo-Composter <i>Handy 350 Oecoplan</i></b> (marketed in Switzerland via Coop Bau und Hobby). The clip and pin should also fit the smaller and bigger models. Please let me know wether they fit or not. I tried to mimic the original design but did not chamfer/fillet all edges in order to reduce complexity. The clip and the pin should be printed with PETG filament in order to preserve elasticity and to allow for outdoor use. PLA ist not recommended. <b>Clip:</b> A brim should be used for the clip in order to ensure sticking to the build plate. Supports are also required at least on the lever side. An infill of 50% is more than enough. Use 0.2mm or 0.15mm layer height. <b>Pin:</b> The pin is printed in to halves with the long flat side on the build plate. Three 2mm long pieces of standard 1.75mm filament can be used to assure the alignment of the two halves (see pictures). Both halves are glued together with super glue (Cyanoacrylate glue). Use 0.1mm layer height if possible.
With this file you will be able to print Clip and Pin for Stoeckler Composter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Clip and Pin for Stoeckler Composter.