Climbing Skin Tail Clip

Climbing Skin Tail Clip

prusaprinters

Overview:This design is for a tail clip to be used with climbing skins used for backcountry skiing, ski mountaineering, and randonnee racing. This design replaces the stock clips in the event that the design which shipped with your skins is poorly designed, or brakes. Design has been tested for light usage and works well, but has not been tested for aggressive kick turns or stabbing ski tails into the snow for storing.There are three separate designs in this upload; Black Diamond (BD), G3/K2, and Pomoca.NOTE: BD and Pomoca versions have not been tested on snow. Therefore feedback would be greatly appreciated.Revisions:Revision 01 - Initial Release - December 11, 2020Revision 02 - Renaming initial upload to reflect K2/G3 compatibility, Added Pomoca and BD versions, Updated overview section to reflect changes. - December 24, 2020REV 03 - Updated BD Design based on user feedback and design optimizations - Feb 15, 2021REV 04 - Added 8mm spacing Pomoca Tail Clip per TGR Mag Request - Sep 29, 2021REV 05 - Updated BD clip to increase thickness for skis, and reduced width by 1.5mm. Also, included a sketch on how the tail clip is fixed to the back of the ski, as I have run into people using this clip incorrectly. Print Settings:Material - PETG, ABS, or PC - PLA has been tested but is brittle at lower temps. If printing with PLA bring a spare clip with you while touring.Perimeters - 3 (0.4mm Nozzle)Supports - NeededInfill Percentage - PLA: 100%, PETG: 50%, ABS: 40%, PC: 30%Layer Resolution - 0.1mmAdditional Details:STEP File has been included so that modifications to the original model can be made easily.This was designed in SolidWorks.Category: Sport & Outdoors

Download Model from prusaprinters

With this file you will be able to print Climbing Skin Tail Clip with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Climbing Skin Tail Clip.