Clean / Dirty Dishes Slider Sign (20mmx2mm Magnets)

thingiverse

Exact same file aside from I enlarged the holes to match my 20mm x 2mm magnets I already had.Description from original post-Instructions:*If you have been 3d Printing for a while - you are probably ok without these instructions for changing colors to make "Clean" Green, "Dirty" Red, "Dishes" Black, and the body silver. However, read on if in doubt and feel free to comment if you need clarification/help.Start "Clean_Dirty_Sign_Parta01.STL" with green filament or whatever color you want for "Clean"As soon as you start to see the sidewall edges form for the word "clean" on the left, which indicates that the word clean's last layer is finished, then change the color to red for the word "Dirty"Change From Green to Red at or between 2.6mm to 2.8mmWhen the red word Dirty is complete, you will see the sidewall edges form around the word "Dirty", and that tells you it is time to change to Silver to complete the print.Change from Red to Silver at or between 3.3mm to 3.5mmIn the slicer orient "Clean_Dirty_Sign_Partb01.STL" with the word "Dishes" at the bottom by rotating on the X axis 180 degrees.*Optionally, (advanced) print with Dishes facing upwards with support material as originally oriented - adjust color change as needed.Start printing the "Clean_Dirty_Sign_Partb01.STL" with the color Silver and change to Black after about 3 to 4 layers at 0.2 layer resolution or 5-6 layers at 0.15 resolution so that the word "Dishes" is Black and finish the part in Black.Change from Silver to Black at or between 1.4mm and 1.6mm