Classic crossbow + NERF

cults3d

Hello to all, I present you today my crossbow, inspired by Legolini's models but entirely modeled and adapted by me on Archicad software. Quite easy to make and assemble. I made two different shooting bodies to transform the classic arrow crossbow into a NERF dart crossbow. For the assembly, you will need: (see pictures) -30LBS fitness elastic. (Two pieces of approximately 11.5cm) -A classic desk elastic to get the charger back in place. 10 ø4mm flat head screws 40mm long with nut. 1 ø4mm flat head screw 50mm long with nut. 1 Flat head screw ø4mm length 28mm with nut. 2 Flat head screw ø3mm length 28mm with nut. 4 Flat head screw ø3mm length 12mm with nut. 4 Classic ø3mm screws with a length of 13mm to be heated with a lighter and screwed to the laser holder. 4 springs ø5,5mm with a length of 38mm. 2 ø5,5mm springs with a length of 20mm. 4 Colson (plastic collars) 2 Synthetic ropes ø3mm knotted at each end (2x7,5cm finished). 1 Synthetic rope ø3mm knotted at each end (16cm finished). A heat shrink sleeve to protect the rope in the shooting body. Usage: 1- Open the reel by side pressure, tilt. 2- Load the desired number of arrows (6max). 3- Close the reel. 4- Hold the trigger down. 5- Cock the gun by pulling the string towards you with the magazine. 6- Release the trigger, the rope remains taut. 7- Aim at the target (CAUTION!! never aim at a person.) 8- Shoot and start again WARNING!!! In its version with classic arrows, this object is for adults and can be dangerous, do not leave armed within the reach of children. Good creation.