Clamping Pieces for the Stabilization of the Guiding Shafts
thingiverse
http://www.aumat.dehttps://www.youtube.com/watch?v=GKkuCZWepTc&feature=youtu.be In order to minimize vibrations of the print head and to thus improve the print image, a clamping piece is fixed to both the left and the right side of the guiding shafts. The drill holes (8 mm) for the guiding shafts should be polished with an H7 reamer. Required additional equipment: 8 screws with nuts and washers M4x25 8 screws with nuts and washers M3x40 1 drill with a diameter of 3.5 mm to drill 4 holes in both the left and the right aluminium sheet. 1 reamer 8 mm H7 Assembly: See photos Instructions Printed it with 95% infill and ABS. horizontal shells = 100% vertical shells = 100% all layers = 100% Be aware that the distance between the 8mm holes is excactly 60mm. printing time: about 9 hours
With this file you will be able to print Clamping Pieces for the Stabilization of the Guiding Shafts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Clamping Pieces for the Stabilization of the Guiding Shafts.