CL-260 Carrier E3DV6

thingiverse

CL-260: Carrier for E3DV6 License: GPL-2.0+ -- GPL Version 2.0 or later. Copyright 2018 Tobias Frost <tobi at coldtobi.de> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. The complete GPL License text should be part of this repository. For the avoidance of doubt, the following items are exempt from the GPL license: - E3D_v6_To_Spec - LM8UU - 50mm radial fan These objects are only used for illustration and are not derived works. They can be found in the "3rd Party Models" Group of the FreeCAD file. The following is a list of the parts used in this project, along with their quantities: | Quantity | Part | Comment | |----------|-----------------------------------------------|----------------------------------| | 1 | printable/HET1 | main part | | 1 | printable/HET2 | part for clamping the E3DV6 | | 1 | printable/FanShroud | guiding the air | | (1) | printable/Clamp | optional. The clamp was intended for holding a piezo, but this feature is untested. | | 4 | printable/Clamp | | | | **Nuts and Bolts** | | | 3-7 | M3 metal inserts (M3, OD=4.2 mm, lenght 3mm) | e.g https://tinyurl.com/y9mz845h | | 1 | M3x?? hex screws | fanshroud 1 mounting | | 2 | M3x?? hex screws | HET2 -> HET1 mounting | | (4) | M3x?? hex screws | clamp mounting | | | **other parts** | | | | 40x40 mm Fan with its screws | | | 2-4 | IGUS 15mm Linear bearings | There is place for 2 in series, but it also works with just one per axis. The following tasks need to be completed: - Illustrate the screws and inserts in the CAD - Reconstruct the fanducts. - Make the Piezo thing (and make it working).