City Bus DETAILED - Turbo Racing 1:76

thingiverse

Bus drive experience in microscale! BUS_FDM_BIG_MIRR.stl - for FDM printers. This have thicker mirrors for good print. BUS_RES_SMALL_MIRR.stl and BUS_RES_BIG_MIRR.stl - with window cut for resin printer - not tested. On FDM printer... print UPSIDE DOWN with 0.4 or 0.2 nozzle, resolution 0.2 or what you want. I have Cura with 0.4 nozzle. I recommended you to change setting in slicer: Print Speed - 30 mm/s (on all setting without Travel, Initial Layer, Skirt/Brim Speed) Wall Line Count - 2 Top Layers - 4 Bottom Layers - 4 Z Seam Alignment - Sharpest Corner Seam Corner Preferance - Hide Seam Small Feature Max Lenght - 10mm (this for slow print small bus mirror) Small Feature Speed - 30% (this for slow print small bus mirror) Small Feature Initial Layer Speed - 30% (this for slow print small bus mirror) Fan Speed - 30% (But I have 5015 fan and have difference force than stock Ender 4010 fan) Compesate Wall Overlpass Outer and Inner (if you have bad print you can disable this) Fill Gaps Between Walls Print Thin Walls If you have problem with adhesion use Brim.